Case Studies

Bathrooms and wet rooms are areas where standard plasterboard is ineffective, standard plasterboard will soak up water which can break down the integrity of the wall and lead to mould and fungal growth.
The solution is to install a performance plasterboard designed for humid or wet areas.
High density plasterboard, 12,5 thick that has a reinforced core with natural wood fibers and glass fibers
125 mm thick partition with double layer of LaDura Plus BA13 boards on each side and mineral wool in the cavity
210 mm thick double frame partition with 1 x PregyPlac BA13 + 1 x LaDura Plus BA13 boards on each side and mineral wool in the cavity
125 mm thick partition with 1 x PregyPlac BA13 + 1 x LaDura Plus BA13 boards on each side and mineral wool in the cavity
220 mm thick double frame partition with two layers of boards on each side and one LaDura Plus BA13 in the cavity, with mineral wool insulation
Lining with single layer of LaDura Plus BA13 fixed to C studs and optional mineral wool in the cavity
Lining with single layer of LaDura Plus BA13 fixed to C studs and optional mineral wool in the cavity
Lining with single layer of LaDura Plus BA13 fixed to furring channel and mineral wool in the cavity
Lining with 1 x PregyPlac BA13 + 1 x LaDura Plus BA13 fixed to furring channel and mineral wool in the cavity
Single frame ceiling with single layer of Pregydro H2 BA13
Double frame ceiling with single layer of LaDura Plus BA13 and optional mineral wool in the cavity
Single frame ceiling with single layer of Pregydro H2 BA13 and optional mineral wool in the cavity
Double frame ceiling with single layer of PregyAquaBoard BA13 and optional mineral wool in the cavity
Follow #Siniat on social media: